This edito is aimed at allowing you to take the measures of your achievements at best in granite and at allowing us to accomplish a complete and definite individual quote.

Countertops:

Catch of measurements:

Becarfull, plans do not exced 2,90 m of the single supporter to allow the transport, handling and pose (weight). Specific requests, to consult us.

Measures must be taken to the most fair according to the pressures of the environment of plan (kitchen furniture, walls, levels...)

Countertops are 3 cm in thickness in general, it is necessary to take into account it. Also they are heavy and require a solid and perfectly fixed and stable foundation. Working plans in 3 cm weigh 100 about kg / m ².

The depth of plans (often 60 cm for kitchens) must take into account the aesthetics and the wall against which they will be appended:

            - plans arrive up to the level of the handles of pieces of furniture and piece of furniture shone even (2 - about 3 cm).

- if your wall is not right, the plan it will be it! To avoid any inconvenience, plans can be built by some centimetres (about 3 to 4 cm) in a wall which would not be straight. Attention to prove the practicability of such operation! A small distance can simply be caught by the pose of a credence (see more low).

Finishing of edges:

Sides (visible edges of plan) can be finished of different manner:

Rights, 1/2 circle, 1/4 circle, beak of corbin...

It is necessary to choose your finishing of edges and to determine edges of your plan which must be finished (visible sides).

Cuts:

A big number of cuts is possible to build in your sink your plate of baking or other one. It is necessary to cause the dimensions of the party to hollow out but also its site in plan (n centimetres of singing face, n centimetres of left singing) ideal is to make a shéma. Prove the correspondence with pieces of furniture located underneath, evacuations and other water inlets.

It is necessary conaître dimensions and model of your elements to build in because they are not standards. It is possible to build in a sink by the top or to apply a basin under plan. In the latter case, singing of the cut has to have a finishing.

Attention some people cups are not possible because it would weaken plan too much and risk breaking it during the transport or of pose... To consult us if necessary.

Credences:

Credences are a wall covering (portray plinths or plates) which comes to position above working plans and allow to finish realization. It is necessary to determine their height and to adapt their length to the length of plans which they overhang. They are in general accomplished in 2 cm in thickness (sometimes 1 cm if they are not too big) and has a edge finished (superior), in general a right sides.

Basins and sinks sharpened in the mass:

Basins and sinks sharpened in the mass are very particular achievements. Many models are accomplishable, however it is necessary to take into account technical pressures: this pieces is sharpened in a complete block which makes of course at least incomparable dimension of final realization. So price is more important (more material and more job).

It is then necessary to determine definitely the total dimensions but also the dimensions of the receptacle (depth).

Attention, sinks sharpened in the mass are very heavy and handling is difficult. It is impossible to accomplish a sink directly tied to a very big plan... To consult us.

Flooring:

Take the measures of your / your room (s), envisage losses owed to cups according to the mode of pose:

            - right pose 5 % of loss about,

            - slanting or alternated pose 10 % of loss minimum.

Do not forget plinths either serrated in normal tiles (1 slab = 2 plinths) or ordered made to order (for very large flooring).

To undertake the precise valuation of your order, you must provide us a maximum of the detailed elements like over for your plan, the ideal remaining a detailed shema. We are at your disposal by telephone and by mail to help you and recommend you in your steps.

First Page     Pictures Colours      Granite     Production     Properties     Installation & Maintenance